BPM-kit v1.1 is a compact EMG/ECG/EEG kit, designed for registration and measurement body biopotentials, such as an electromyogram, an electrocardiogram, and an electroencephalogram.
Very easy to use with such microcontrollers as Arduino, STM32 and Teensy. To receive a signal, it is enough to power the device with a voltage of 5V (no more than 5.5V) and connect the output signal to a microcontroller input.

We provide free libraries for using BPM-kit v1.1 with Arduino, Teensy and STM32, also we provide sketches for visualisation signals by Python and Matlab.

Features:

• Operate voltage is 4.5 - 5.5 V. Typical 5.0 V.
• Low supply current 3 mA.
• Two analog output channels: OUT1 in the range 0 - 3.3 V and OUT2 in range 0 - 5 V.
• Base gain is 1000 V/V, can be increased by 8 additional Gain Selections: x1, x2, x4, x5, x8, x10, x16 or x32 V/V
• Serial Peripheral Interface (SPI) gain selection.
• 8 - 100 Hz filter.
• Dry skin contact.
• Stainless steel electrodes.
• Libraries for Arduino, STM32 and Teensy
• Examples of sketches for signal visualisation by Python and Matlab

NOTE 1: this product is NOT a medical device and should not be used to diagnose or treat medical conditions.
NOTE 2: this product requires high-level soldering skills.

See the pdf-file below for more information on the features and connection of the sensor.
Datasheet BPM-kit v1.1 (.pdf)

Interesting Related Articles and Reviews

• Article: "Electromyogram.What it is?"
• Article: "Overview the Elemyo-library for Arduino."

If you plan to use the kit with a plugged-in PC (connected to the household power supply), we recommend purchasing a USB Isolator: it will reduce the interference caused by the household power supply and also make the connection safe.